Installation FAQs

Folder for adding Shipping FAQs articles

DO THE PERFORMNCE CHIPS WEAR OUT?
Generally, the flakes will outlast the coating.
Fri, 29 Jan, 2021 at 10:58 AM
WHAT ARE THE PERFORMANCE CHIPS USED FOR?
They help hide imperfections in the floor by adding a decorative look.
Fri, 29 Jan, 2021 at 10:59 AM
DOES THE FLOOR GET SLIPPERY?
Yes, when water or oil is present. Aluminum oxide non-skid is recommended to reduce this condition if you have excessive water or oil.
Fri, 29 Jan, 2021 at 11:13 AM
HOW MANY SQUARE FEET WILL A FULL KIT COVER?
Up to 500 square feet at 9.7 mils Dry Film Thickness. Up to 240 square feet for 20 mils Dry Film Thickness. Most industrial floors apply at 16-20 mils Dry F...
Tue, 2 Feb, 2021 at 4:23 PM
IF YOU HAVE CONTAMINANTS ON THE FLOOR AND THEREFORE HAVE FISH EYE PROBLEMS WHAT SHOULD YOU DO?
Re-roll the floor until the fish eyes go away and prior to flaking/ non-skidding the floor.
Fri, 29 Jan, 2021 at 12:10 PM
WHAT SHOULD YOU DO IF YOU HAVE BUBBLING PROBLEMS DURING INSTALLATION?
Take a leaf blower and blow the top of the surface to remove the surface tension and removing the bubbles.
Tue, 2 Feb, 2021 at 4:24 PM
WHAT TEMPERATURES CAN I APPLY EPOXY-COAT?
40-80 degrees F, below 80% humidity. The cooler it is and the less humidity the more working time you have to apply the epoxy. We recommend applying in th...
Tue, 2 Feb, 2021 at 4:29 PM
What Do I Do If The Prep Solution Does Not Effectively Profile My Floor?
You can purchase muriatic acid and re-etch the floor or diamond grind the surface.
Thu, 4 Feb, 2021 at 11:37 AM
Are There Any Other Special Requirements For Indoor Applications?
If your indoor floor is prepped with a muriatic acid treatment, you will need a floor drain and ventilation. The muriatic acid does need to be rinsed down t...
Thu, 4 Feb, 2021 at 2:27 PM
How Can I Remove Dried Epoxy-Coat From Driveway Concrete?
We recommend using a safe paint stripper (home use). You can also use a power washer or hand held diamond grinder to remove this stripper.
Thu, 4 Feb, 2021 at 2:29 PM